42 Series Rotary Brush

42 Series Rotary Brush

 

Timesavers 42 Rotary Brush series, winner of the Red Dot design award 2016, is  Timesavers most popular solution for customers who require a fully deburred part of high quality and beautiful finish.

This is accomplished using a multi-directional brush machine, with two heads, that uniformly deburrs and finishes the edges of laser-cut, punched, and machined parts in one pass. Providing even, controllable edge radiusing in all directions on flat, shaped,  plasma cut, punched, machined parts or 3D parts. The Rotary Brush will deburr edges of small and large parts without harming surface coatings such as cladding, zinc, or laser film.

Applications:

  • Removing burrs from laser, plasma, flame, waterjet cut parts, punched, machined and routed parts
  • Stainless steel, mild steel, aluminum, copper, etc.
  • Deburr zintec (standard and AF), galvanized, plated, aluzinc, light alloy, plastic and film coated, without coating damage, including ink marked parts
  • Even, controllable edge radiussing for e.g. aerospace, catering, medical industries
  • Flat, shaped and 3-D parts with pockets/protrusions
  • Pre-grinding of heavy burrs and surface finishing in one pass
  • Processing of mixed materials with suitable wet dust collector
  • Aluminum, stainless steel, mild steel
  • Processing of small parts 50 x 50 mm possible with standard vacuum table

Specifications:

  • Number of Heads: 1-3
  • Head Types: Rotary Brush, Drum
  • Machine Widths: 1,000 mm, 1,350mm
  • Abrasive Brush Size: 350 mm
  • Number of Brushes: 2 (RB-1000), 8 (RB-1350)
  • Quick Change Brush Mounting
  • 0-100 mm Bed Opening
  • 0,6-8 m/min  Feed Speed, 1,3 KW
  • Up to 11 KW Main Drive Motor
  • 180 mm Diameter Adjustable Contact Drum
  • Vacuum Conveyor Bed
  • Dust Collection (Quoted separately)

 Standard Execution:

  • Centralized control panel with simple set-up
  • Rotary brush head carrousel with clockwise and counterwise rotating brushes
  • Extremely long lifetime of brush tooling up to 3000 hours (low tooling cost)
  • One or two abrasive belt contact roller heads available
  • Vacuum table with access for internal cleaning
  • Motorized table opening for work pieces 0 – 100 mm
  • Frequency controlled conveyor speed 0.5 – 8 m/min
  • CE
  • Window doors and illuminated machine interior to observe and control process
  • Led bars on infeed and outfeed side that shows machine status
  • Quick tool exchange system for brushes and abrasive belt
  • Observe and control process